Moon Clan (Chaos beastmen) #4

Another bunch of beastmen got just finished so apparently Chaos Children warband project is nearly done. The gang is only dozen or so models, but must admit I've slowly started getting sick after painting Chaos only stuff. Looking forward for some change on painting desk. Olive green change...

The last trio are champion (beastlord), standard bearer and school bully - minotaur. I had lots of fun working on them: painting paper banner brings lots of memories. I still prefer paper banners over plastic or icons on stick. It's light so small model can carry pretty large standard without falling off. Bad Moon ain't new idea - 10 years ago I used it on the first zombie dragon project. Sure it should be greenskins' stuff but at the same time it's Warhammer Fantasy, and when it comes to worshipping evil forces - Chaos is not picky.

New models were painted using the same color palette as rest of the group so they all look nice marching together. They still need basing and display base but since it requires lots of pva glue - it also requires lots of time for drying and therefore it gets dedicated post. There's never enough Chaos spam after all... 😁

Minotaur sculpt got pretty aggressive, assaulting pose so for postcard purpose it got worthy opponent - Skaven rat ogre, trying to block falling axe with it's steam-powered, corrupted claw. And because poor rat-man is outnumbered it's assisted by mysterious Raze from Dark Age range. I know it's not Warhammer but who the hell knows what those twisted engineers from Clan Moulder have been working on recently: there might be rat-head under that mask as well... 

For some mysterious reason photos turned out to be kinda overburnt - no idea why: models for matt varnish as always, I used same set of lamps and tested background (pic of Moon Clan #2 were much better). My guess is the Horned Rat got pissed I dared to use rat ogre as sparring partner for minotaur. No matter what the reason is I might dig out light box trying to get as good photo conditions as possible. Ok, back to basing work to get this thing off the list:

Raze (Dark Age)

I've just came back from Khemri and because some Cryx models are still getting ready in paint stripper spa, decision was made to rescue something else from the very bottom of paint stripper container.

What you see below is Raze from Dark Age range. From what I can see I got it almost 10 years ago but somehow never managed to make any use of this model. Must say I got Dark Age materials + some models just because of Brom's artworks. These is really coor but also really weird sh!t, so that's probably the reason I painted only 2 minis from the range so far.

The fact game rules aren't anything special also could have something to do...

It's my 3rd attempt to paint this models and I'm really glad I can finally see it painted and sealed. Had some ideas how to paint it but once again I feel just best using natural tones. I am still considering adding some blood on the piece. Not sure is the "pizza cutter" the best place for it - it's rotating blade so my guess is if such a weapon hits the flesh - the blood should cover just like everywhere, and I am rather satisfied of the paintwork... 😁

The model is pretty unique both by design and size - probably that's because I couldn't find any use for it on gaming table. Looking at it compared to other models, it could proxy Chaos Dreadnought with ease. It's makes Skaven rat ogre look like a kid, not even mentiotning human size miniatures (on the pic - Warzone Cybertronic chasseur hero). 

Really happy to see it crossed off the shame list. Time to wash off sth more ordinary...

Just to keep the client informed

Well this time there's no spectacular post:

the main reason is I want my client to know there is something going on with his model.

And there is:

Eando Kline has already got the bases (both gaming and display) but I also managed to slap some paint on the sculpt itself. Which is quite remarkable thing because I was left with the kid for a few days. Which means no late night painting sadly...

During painting the piece one thing came to my mind: next time before painitng anything else from Reaper range I will think twice. And one time more just to be sure. These sculpts are very detailed and sadly I don't think my paint-fu is good enough to provide proper paintjob.

It might be this or fact I simply prefer other toys. Whatever. Commission is commission so the model will be done. 

Another work in progress shot is the Cankerworm for Battle for Hope December event.

I've been assembling the base while waiting for paint on Eando to dry, so right now there's only some sand, glue and basecoat. But as you can already see I decided to give it the base much more my style: rusty and dirty.

Bright orange pigment made of powdered rust (no shit) should look really striking and imo really nice applied on dark metals of the worm. I think to make it more striking I will also enchance the OSL painted so far.

I think I should've asked the BfH guys weather they prefer getting gaming model or display / souvenir one. But then again it's a charity piece so the potential owner shouldn't mind. Hopefully ^^

Whate else?

Just some random crap. For starters - my old, trusty display case has been upgraded (elevated on the drawers + inside lights added) and installed (screwed to the wall) at new place. As you can see there's still lots of empty spaces inside - I haven't got all the toys from the moving madness yet.

The need of modifications was the safety. I saw my kiddo running around and bumping into furniture and because of the thin glass - any unfortunate accident could have very severe consequences. Both for him and for me. I think I will also change the study door lock as well - you can never be sure.

Last week we had Halloween. For me it's still strange to see trick-or-treaters running on streets in the evening, I just do not buy it.

I think the whole celebration here is failed attempt to import another opportunity to make people go to malls and buy tons of useless shit (like costumes for kids and pumpkins). But since I do not participate in the circus - it's not my business how others spend time and what do they spend hard-earned money for.

Just before moving I got a pumpkin from my friend and frankly had no idea what to do with it - until the last Thursday. I didn't plan eating it so decided to give a try to work on it with some knives. In fact it was my very first Halloween pumpkin ever made and as for total beginner I am quite satisfied with the result. Sadly all my efforts didn't impress my kid (he likes it but wasn't scared at all) so it was also the last carved pumpkin for me.

And the very, very last thing for this post.

Last Thursday we finally got the opportunity to play Dark Age: Skarrd vs Forsaken led by St. Mary. The game was kind of test - sadly the first impression wasn't anything special. I got feeling the game was simply slow (probably because I used to play lots of Warmachine earlier). But after pushing models on the table and rolling some dices I got better idea about the rules and units' possibilities.

Right now I know we will probably give the game a chance or two before we decide about supporting it or not. I also know Skarrd Father, no matter how nasty it looks, can be torn to pieces by bunch of frenzied Strikes. And that St. Mary is one nasty, tough as nails b!atch.

Hope to kick her ass shortly.

Laters!

Mutants? Cannibals? Blasphemers? Count me in!

Heya again,

After very short thoughts exchange with mr Floyd Snotling after my previous post I felt a little bit like being face-slapped with a glove. Well maybe not exactly but...

But strong enought to get hooked by completing 500 pts Skarrd battle group challenge!

I can only hope there is a wife and kid waiting for you at home mr Snotling so we both have equally small amount or free time to get some new toys painted =]

Sadly the biggest problem here is getting any Dark Age models at all so I think I will have to import some infantry and maybe something bigger sometimes later...

Speaking of which - last weekend I managed to assemble and base Father and Bone Doc (pinning his thin fucking arms would be impossible without Dremel gizmo) so my warband is now 160 pts strong. Sure it doesn't really matter until they are painted but it's just a start. I hope to get Raze delivered shortly (another 160 pts hehehe) so there'll be only some cannon fodder to be added.

As for the colors at first I was hoping to paint them similar to the original Brom's works: 

lots of browns, oranges and black. This would look nice with strongly corroded metal elements. But then I realised trying to copy someone's idea and brillant execution will probably turn out like crap, so I changed my mind.

Changed it after spending some time painting the commissioned Galleon purple.

I've realised I have never used much of this color and kinda underestimated it. 

And it's probably the best fluff-wise choice for the Father and hs sidekicks. After all it used to be reserved for royality and top priest superheroes (bishops or any other fat bastards). Skarrds are twisted religious maniacs so they should like the outfits.

And since we're at the twisted matter - there's been small progress on the Galleon again. I really want to see the model painted before moving out.
The purple tone was build using VGC royal purple, hexed lichen and Citadel purple wash - several diluted layers of paint over zenithal base coat. Metalic tone is mix of boltgun metal, black, dark brown and some olive. It's going to be VERY dirty model.

Dark ages are coming...

What the title said: there are dark ages ahead!

There's a plan to move to the new flat in about a month, which is ALWAYS terryfying experience, but more important (and dark) I broke the new year's vow. Broke is again to be honest:

I purchased the miniature!

The model is Mordred the Damned from Celtos game range. I've already painted another deader from Celtos game range a while back, which was even posted at Brigade Models' site, and Mordred is another cool sculpt I wanted to see painted on nice display plinth.

But it wasn't like I was sitting in front of PC screen and accidentally added the model to the shopping cart. This fella was an addition to Dark Age books!

Browsing forums is dangerous and may be quite tempting. After reading some Dark Age fluff I decided to get some old DA materials for the hobby bookshelf in the new place. I got old Genesis, Evolution, Exodus and Essence. These grimoires are packed with nasty Brom's drawings + some juicy fluff so I finally know something more about Dark Age minis.

The seller gave me nice discount so there was no other choice but getting something new for The Pile*, so here's for story of Mordred.

Last week after having Necromunda game (Finally! A month long break from gaming was something I could barely stand) I brought some Skarrd and Brood models and there's a chance we will give the game a try.

Necromnda is fun but playing just one game for over 1,5 year now is getting kinda boring. Dark Age has really cool and morbid fluff which fits my painting style ...

At this stage I am planning to run small 500 pts Skarrd tribe so there goes the vow again ^^ 

Last Saturday apart from the phone bill the postman delivered something else:

something ancient, evil (according to human standards) and bound to ocean...

Great Cthulhu has arrived!

As you can see below it's an old sculpts and I think according to "modern" standards it's just ugly. Well it is... But I've never considered Cthulhu type of Justin Bieber handsome guy ^^

After a month long waiting the Great Ancient One have knocked at my door (hmmm... Can someone actually knock with a tentacle?). and am very glad I decided to use Father's Day promotion at RAFM site. 

The model is as you can see - big. It's also very old sculpt so there is a lot co complain about casting and more important - assembling. But I am strongly motivated to see it painted nicely standing on large display base. Keeping fingers tentacles for it!

And the last part of this week update:

Works on the Galleon moved a bit forward again. At this point the model itself is being painted rusty browns but here you can see it standing on the second muddy base. At first I wanted to add some more chunks of mud but then decided to hear the client's opinion:

I think the base is fine as it is especially for gaming purposes (apart from the barbed wire not much can fall / break off). When I was pouring the mud on the base I realised I like it a lot.

So much that similar bases will be used for my Skarrds.

Apparently I owe the client a beer - thanks dude! ^^ 

So as you can see - quite a lot of minis are started / being started, hope to present the painting results shortly.

Ph'nglui mglw'nafh Cthulhy R'lyeh wgah'nagl fhtagn!

*The Unpainted Pile of Shame that is...